Home  |  Sitemap

Thermally processed dry film that delivers optimum image quality for all image modalities

SD-P/SD-PC are dry films designed especially for the Laser Imager DRYPRO. This new film uses dry processing technology and does not require wet processing chemistry

Sharp, clear images are assured by optimized control of image tones for CT, MRI and other image modalities. Special new anti-halation technology increases image sharpness.

Designed for linear gradations from low-through high-density areas, SD-P/SD-PC delivers excellent diagnostic clarity in the processed image.

Daylight packaging makes the film easy to handle. (Film is available in the following sized, 14 X 17inch(35 X 43cm), 14 X 14 inch (35 X 35cm), 11 X 14inch, 10 X 12inch, 8 X 10inch, 125 sheets per box.) The film is available in a vivid blue or clear base type, to allow selection of the appropriate film for the application.

Dry film image formation

• A latent image is recorded in the silver halide of the film by laser exposure.
• During dry development, silver ions are supplied to the latent image from Organic silver oxide emulsions, causing the developed silver image to appear.
  

Storage and handling conditions for SD-P/SD-pc dry film

Medical Imaging Film SD-P/SD-PC is a dry film requiring no wet processing. As explained below, it should be stored and handled with care.

Storage and handling of unexposed film

As with other types of film, unexposed dry film should be stored in a cool, dry and dark place (25ºC or below) in the original packaging and protected from all types of radiation.

Storage and handling of processed film

Dry processed film may be affected by high temperatures and strong light, even after processing. To protect images on the film, the film should be stored in a cool, dry and dark place.

The page is under construction, Thank you please visit later

Other
Laser Imaging Film

The Nippon Group Home | CGL Home | Contact us | Sitemap