Home  |  Sitemap

Applications
Konica imagesetter Film VR is designed for imagesetters and scanners with HN(633nm) and RLD (630 – 680 nm) out put devices.

Technical Data

Color Sensitivity

I

Imgesetter Exposure

Features

• Wide exposure and development latitude
• High Practical Density
• Excellent image Quality
• Good Linear out put for conventional screening
• Approved for stochastic screening
• Antistatic before and after processing

Recommended Processing Condition (RA Processing)

Developer	Dev. Temp	Dev.Time
Konica Developer Type 621 / 661	35º C (95º F)	30 sec

Recommended Replenishment Condition

Developer
Konica Developer Type 621 / 661	Percent Expoed	Tank Turnovers Per Week
250ml /m2 (0.16ml /sq.in)	20%	Minimum of 1
300ml / m2 (0.19 ml / sq.in)	50%	Minimum of 1
350 ml / m2 (0.23ml sq.in)	80%	Minimum of 1

Fixer
Konica Fixer Type 851 / 861	Percent Expoed	Remark
300 ml/m2 (0.19ml /sq.in.)	0 ~ 100%	Fix.Temp. 32 º C(90º F)

Safelight

• Written #3 with a 15 watt bulb
• Encapsulite T 30 / N.D. 1.75 or equivalent

Keep the film at least 1.2 meters (4 feet) from the safelight
Do not expose the film to safelight illumination for longer than one minute

Dimensional Stability
VR polyester base gives the maximum dimensional stability obtainable. However, any film will change size slightly in extreme atmospheric condition. In general, too high dryer temperature will cause a size increase and too low temperature will cause a decrease.

Storage
Store in a cool, dry area, preferably below 21º C (70ºF) and 55% relative humidity.

Compatible imagesetters (Partial List)

Manufacturer	Model
Agfa	Avantra
Agfa	Accuset
ECRM	Knockout
ECRM	VRL
ECRM	Mako
ECRM	Marlin
Heidelberg Prepress	Herkules
Heidelberg Prepress	Quasar
Heidelberg Prepress	Signasetter
SCANGRAPHIC	Largo
SCANGRAPHIC	Appollo
SCANGRAPHIC	Othello
SCANGRAPHIC	Futuro
SCANVIEW	Dotmate
Screen	FT-R 3050
	Ft- R 3035
Scitex	Dolev

 

 

Other
Graphic Art Films

The Nippon Group Home | CGL Home | Contact us | Sitemap